Computerized Servo Universal Tensile Machine UTM 5KN-300KN
Hydraulic
Applications
A. Tested sample: laminated materials, wood, leather, rubber &
plastic, metal material, etc.
B. Different test with different grips: tensile, peel, tear, heat
seal, adhesive, bend and open force.
C. Deformation under defined load: Test deformation under defined
load of tested sample
D. Load under defined deformation: Test load under defined
deformation of tested sample
Software can issue word/excel report with results for max. force,
elongation, tensile strength, peel strength, tear strength,
compression strength, etc.
Standard
Including but not limited to ASTM,JIS,CE, ISO,EN,BS
EN,SAE,FTM...etc.
General test Project
Tensile stress, tensile strength, tearing strength, breaking
elongation, fixed extension stress, constant stress elongation,
constant stress value, tearing strength, arbitrary point force
value, elongation at any point, pulling force, adhesion and peak
value, pressure test, shear stripping force test, bending test,
pulling force puncture test.
Technical characteristics
1. Imported motor, low noise and precise control
2. Computer LCD display, Chinese menu, HP printer
3. During the test, the tensile time and the maximum test force are
displayed in real time; and can be displayed.
4. In the 0-50N measurement range, the accuracy can reach 0.001N
and the resolution is 0.001N. It is professional for the
measurement of the corresponding parameters of waterproof
materials.
5. High degree of automation, the instrument design uses advanced
domestic and foreign devices, single chip microcomputer for
information sensing, with automatic reset, data memory, overload
protection
6. Get measurement results directly: After completing a set of
tests, you can easily directly display the measurement results and
print statistical reports, including averages, standard deviations
and coefficients of variation
7. Optional with standard serial RS232 interface, which can provide
data communication for the upper computer comprehensive report
system
8. Multi-function, flexible configuration: the instrument is mainly
used for measurement of metal and non-metal materials, changing the
configuration of the instrument can be widely applicable to the
measurement of other materials
Characteristic
1. The base is supplemented by the aluminum alloy profile column
with advanced spray treatment;
2. Adopt high precision, no clearance ball screw and timely gauge
belt to ensure the accuracy of the transmission system;
3. Fully computerized data acquisition and motion control;
4. The test software under Windows XP operating system, users can
use the existing functions of the software to complete the
mechanics test project, and can also edit the test method according
to their own actual needs;
5. Better than 0.5 level of force measurement accuracy, 1/300000
force value resolution.
Safety device
1. Limit protection: with program control and mechanical bipolar
protection, to ensure the normal operation of the instrument in the
set stroke;
2. Overload protection: when the load reaches 110% of the force
sensor, the instrument will stop automatically;
3. Automatic diagnosis: check the measuring system and driving
system regularly for over voltage, over current and over
temperature, and stop immediately when abnormal conditions occur.
Parameter
| Model | YY-20K | YY100K |
| Capacity(KN) | 1,2,5,10,20,50,100,200,500,1000,2000(KN) optional(or customize) |
| Accuracy level | 0.5% |
| Effective pull space | 1200mm(contain grips) |
| Effective test width | 400mm | 320mm |
| Effective test force range | 0.02/100~100% |
| Speed accuracy | Less than ±0.5% |
| Displacement accuracy | Less than ±0.5% |
| Deformation test accuracy | Less than ±0.5% |
| Sensor | High Accuracy Sensor |
| Test force resolution | 1/250,000 | 1/150,000 |
| Test Speed | 0.1~500mm/min | 50~500mm/min |
| Motor system | Panasonic servo motor + Panasonic sevor drive | AC motor + AC drive |
| Lifting control | Computer control or manual button control |
| Optional parts | Lenovo computer |
| Dimension | 80×50×150cm |
| Operation method | Computer Control |
